| Select
a Product Type or Manufacturer:
|
| or
Search our site by Keyword:
|
 | GM S-10 / S-15 Lowering Kits & Components |
| Chevy S-10
/ GMC S-15 2"/3" Lowering Kits: The 2" / 3" drop is a very popular one for those wanting to eliminate wheelwell gap while staying on the conservative side of both "look" & "ride quality". Whether you choose the Economy or the Deluxe drop, it's easy to install, too. |  |
| '82-'04
GM S-10 / S-15 2" / 3" Economy Drop Kit: Our most cost-effective 2" / 3" drop is the Economy drop you see to the right. It uses 2" Smooth-Rider coils in front for an ultra-nice ride. For the rear, we use Western's heavy-duty extruded aluminum 3" drop blocks with u-bolts. If you're on a budget, and you're looking for a simple, conservative drop for your GM mini-truck this may be the kit for you . . . '82-'04 S-10/S-15 2" / 3" Economy Drop: $139.95 |
|
| Don't forget to add 4 Nitro-Slammer
shocks to your kit! Better ride quality (less bottoming & bouncing) for just $39.95 each ! |  |
| '82-'04 GM S-10 / S-15 2"/3"
Deluxe Drop Kit: If you want to maintain factory ride quality with 2" drop front spindles, our 2" / 3" deluxe drop is for you. This kit is avail- able with 3" rear blocks or can be upgraded with Western Smooth-Rider leafs for better-than-factory rear ride quality. Simply swap the factory components and you're done . . . '82-'04 S-10/S-15 2"/3" Deluxe Drop: $199.95 '82-'04 S-10/S-15 2"/3" Deluxe with Leafs: $329.95 |  |
| Don't forget to add 4 Nitro-Slammer
shocks to your kit! Better ride quality (less bottoming & bouncing) for just $39.95 each ! | |
| Chevy S-10 / GMC S-15 3"/4" Lowering
Kits: The 3"/4" drop is our most popular combination for the Chevy S-10 / GMC S-15. The truck on the right is a good example of why the 3"/4" is such a hot combination. It gives you a nice, clean, very noticeable drop without being too extreme. |  |
| '82-'04
GM S-10 / S-15 3"/4" Economy Drop Kit: If you're after the most drop for the least money, its tough to beat our 3"/4" Economy Drop. Pictured at the right, it uses Smooth Rider 3" coil springs and 4" rear Western Chassis extruded aluminum heavy-duty blocks with u-bolts and hardware. Simple to install, you just swap the coils and sandwich the blocks between the leaf springs and axle. '82-'04 GM S-10/S-15 3"/4" Econo Drop: $139.95 |  |
| Don't forget to add 4 Nitro-Slammer
shocks to your kit! Better ride quality (less bottoming & bouncing) for just $39.95 each ! | |
| '82-'04 GM S-10 / S-15 3"/4"
Deluxe Drop Kit: In order to maximize your front suspension travel and ride quality, we suggest 2" front Western spindles and 1" Smooth Rider coils. This is the kit for you if want the best in frontal ride quality with maximized suspension travel. The rear uses a 4"block kit. ( Leaf upgrade available for superior ride quality.) '82-'04 S-10/S-15 3/4 Deluxe Lowering Kit: $299.95 '82-'04 S-10/S-15 3/4 Deluxe & Rear Leafs: $439.95 |  |
| Don't forget
to add 4 Nitro-Slammer shocks to your kit! Better ride quality (less bottoming & bouncing) for just $39.95 each ! | |
| '82-'04 GM
S-10/S-15 4"/5" Deluxe Drop Kit: Virtually the same parts as the 5"/6" Economy drop below, this kit use 2" drop Western Spindles and 2" Smooth-Rider coils in the front, along with 3" rear Smooth-Rider Leafs and a 2" block kit with u-bolts. Perfect for the guy who wants a bit more clearance than the 5"/6" and doesn't want to worry about having the notch the rear frame. It's a hard-to-find kit ! '82-'04 GM S-10/S-15 4"/5" Deluxe Drop: $459.95 |  Kit Photo Not Available |
| Don't
forget to add 4 Nitro-Slammer shocks to your kit! Better ride quality (less bottoming & bouncing) for just $39.95 each ! | |
| Chevy S-10 / GMC S-15 5"/6" Lowering
Kits: Our 5"/6" drop is the ultimate combination for the guy who wants it deep in the weeds. A full inch lower than the 4"/5" shown above, the 5"/6" is the killer drop for those of you road warriors that just can't get low enough . . . | Photo
Not Available |
| '82-'04 GM S-10 / S-15 5"/6"
Economy Drop: This one brings it all the way down! The kit uses 2" Western Chassis front drop spindles combined with 3" Smooth-Rider coils. In the rear, 3" drop Smooth-Rider leafs combine with a 3" block kit. Lifetime guaranteed and American-made, we haven't seen anyone else advertise anything like it. See the Deluxe drop below for more rear axle travel, less bottoming. '82-'04 GM S-10/S-15 5"/6" Econo Drop: $459.95 |  |
| Don't forget to add 4 Nitro-Slammer
shocks to your kit! Better ride quality (less bottoming & bouncing) for just $39.95 each ! | |
| '82-'04 Chevy S-10/GMC S-15
5"/6" Deluxe Drop: In addition to the components used in the 5"/6" Econo drop above, this Deluxe kit also includes rear weld-in c-notches & bump stops to help reduce bottoming in the rear. Once the universal c-notches are welded in for the additional frame clearance, reinforcing the area with steel is required to maintain proper structural strength in the notched area. '82-'04 S-10 / S-15 5"/6" Deluxe Drop: $499.95 |  |
| Don't forget
to add 4 Nitro-Slammer shocks to your kit! Better ride quality (less bottoming & bouncing) for just $39.95 each ! | |
 |
